As a manufacturer of inorganic pre coated boards, our product packaging is very tight when leaving the factory, and the complete packaging should be stored in the room. So how should these materials be stored when we are building?
Firstly, if it is to be stacked outdoors, the stacking location should be neat and there should be no water storage, and there should be no lifting machinery or lifting objects passing through the air. The board should be raised by a cushion block of 20cm, and soft materials should be placed between the boards. The boards of the same model should be placed together, and each stack of boards should have easily identifiable board shape markings and be covered with waterproof and waterproof oil paper.
Secondly, when our manufacturer transports inorganic pre coated boards, in order to prevent the formation of surface oxide layers or coatings. When assembling wall panels, only one panel can be lifted at a time. The special fixture provided by the manufacturer should be used to lift the wall panels at two points at the intersection of the long and short angles of the wall panels.
Also, consider the distance between the building curtain wall, working face, and core line; Compare the reference plane to find the spacing and position of the reference point, and pay attention to visibility; Compare the reference surface to find the spacing of the installation angle; The level difference between the control elevation and the control elevation; The longitudinal spacing with the building and the spacing with each building.