无机预涂板如何进行放置？

　　作为无机预涂板的厂家我们在出厂时产品的包装都会非常严丝合缝的，完整的包装宜存放在房间内。那么我们在进行建筑时，这些材料应该如何存放呢?

　　As a manufacturer of inorganic pre coated boards, our product packaging is very tight when leaving the factory, and the complete packaging should be stored in the room. So how should these materials be stored when we are building?

　　首先如果要如堆积在户外，堆积地址应整齐，不能有存水且空中不得有起重机械和吊物通过，板内用垫块抬高20cm，板和板之间是摆放软性材料，同样型号的板摆放在一起，每垛板里应该有便于识别板形标识，并遮盖防水防雨油纸。

　　Firstly, if it is to be stacked outdoors, the stacking location should be neat and there should be no water storage, and there should be no lifting machinery or lifting objects passing through the air. The board should be raised by a cushion block of 20cm, and soft materials should be placed between the boards. The boards of the same model should be placed together, and each stack of boards should have easily identifiable board shape markings and be covered with waterproof and waterproof oil paper.

　　其次我们厂家在运送无机预涂板时，为了防止造成表层氧化层或镀层。组装墙面板时，每一次只有吊装1档板，应使用生产厂家所提供的专用夹具在墙体板长短角度的拼凑处2点吊装墙体板。

　　Secondly, when our manufacturer transports inorganic pre coated boards, in order to prevent the formation of surface oxide layers or coatings. When assembling wall panels, only one panel can be lifted at a time. The special fixture provided by the manufacturer should be used to lift the wall panels at two points at the intersection of the long and short angles of the wall panels.

　　还有就是考虑建筑幕墙面、工作面与核心线间的距离;对比参考面找到基准点的间隔与部位，留意通视性;对比参考面找到安装角的间隔;与控制标高中间的水准差;与房屋建筑纵向的间隔以及与各楼的间隔。

　　Also, consider the distance between the building curtain wall, working face, and core line; Compare the reference plane to find the spacing and position of the reference point, and pay attention to visibility; Compare the reference surface to find the spacing of the installation angle; The level difference between the control elevation and the control elevation; The longitudinal spacing with the building and the spacing with each building.

　　总而言之，无机预涂板需要进行标准化存放，才能确保产品品质，我们川石作为无机预涂板厂家会相应的给客户安排存放，保障售后服务，欢迎大家前来考察。